Autopsy table with adjustable height and downdraft ventilation system

The professional autopsy table with automatic lifting system is completely stainless Aisi 304 with a thickness of 8/10 and 10/10 that is reinforced and shaped to make it stronger to be used with the normal autopsy instruments and the normal cleaning and disinfection products, it is long lasting in time. It is made up by a plane with perimeter border to contain liquids which is properly inclined without edges, with particular slopes allowing an easy flow of water towards the wastepipe. The upper part is composed by a series of removable drilled planes allowing the body placing, the flow of washing waters and the suction of the air directly from the plane. The suction happens thanks to an exhauster that is integrated in the table and placed inside the supporting structure through two pipes covering the whole length that are properly protected (mushroom shaped) to prevent from water infiltration. The air must be put again in the environment through a pipe to be placed in the room. The table has a sink whose size are 500 x 400 x 250 mm and it is equipped with Taps and fittings with mixer for hot and cold water. The supporting element is made up by a stainless steel central structure allowing its lifting from a minimum of 850 mm up to 1050 mm maximum. The operation happens through the proper switch with slope and descent controls. The table is equipped even with an irrigation system along with all the plane through water ejectors placed on the side opposite to the wastepipe, electric grinder-waster for the organic waste disposal of the water exhauster “Venturi” system that is necessary to clean the anatomic part that will be part of the autopsy.

Also available in versions:

Accessories: